FAQ

For your questions, use #support-forum channel in our Discord: https://discord.gg/RZYWusahP3

How do I turn my WOWCube off?

The “Power” title on the WOWCube will put the cube in a stand-by state; in order to turn it off you need to open the WOWCube app and go to Energy Saver and hit “Cube Shutdown”. To power it back on, place the cube on the charging dock and press the “reset” button. Alternatively, after hitting "Power" icon on the cube, you can insert the plastic cover (labeled with a black cat) in one of the sides of the cube; this will keep it off.

I turned my cube off with a full battery but I noticed once I turned it back on that the battery level decreased.

To make sure your cube keeps the same battery level you need to insert the plastic cover that initially came with the cube (with a black cat) in any of the cube’s sides.

Here's a sample of the plastic tab (black cat):

https://wiki.wowcube.com/images/d/db/Plastic_Tab.jpg

Once you remove the plastic protector, the cube will turn back on.

How do I update the games? Most of the games say they need an update and to scan the QR code. When I scan the QR code it opens the app on the phone and that’s it

Go to the corresponding game page in the mobile app and use the Update button there. The proper QR-code redirection will be fixed in the next mobile app versions

I got some module errors, what do I do?

You can reset the cube by placing it on the charging dock and hit the reset button. If this doesn’t work, you’ll have to do a Hard Reset. In order to do this, you have to insert a thin piece of metal, or a metal knife in one of the sides of the cube, this will cause a full reset (Don’t worry, this will not damage the cube) just make sure you DO NOT do this while docked on the charging station, this will burn the charger and create more issues.

More error-cases explained you can find in our Troubleshooting_guide

I paid for a game and had to uninstall it, when I tried to reinstall, it is asking me to pay for it again?

Please activate the gift-card which you received with your Cube, to link the pre-paid games to your personal profile. You can activate your gift-card in your personal profile on our website wowcube.com (Add funds) or in the mobile app (Activate giftcard).

If you still see the problem - please don't hesitate to contact us via email [email protected]

My Cube is not connecting to the app.

Make sure your cube is close to your phone/tablet. Turn your phone’s/tablet Bluetooth off, close the app, place the cube on the charging dock and hit the reset button, turn Bluetooth back on and open the app; the cube should connect now. If it doesn’t auto connect, hit the three dots to the right of the cube’s name and hit Connect. You may also try to change your location (to avoid a possible radio interference, from a microwave oven for instance) or delete and re-install the WOWCube Connect application, and do a complete phone reboot.

Sometimes deleting the Cube from the list of paired devices in the Bluetooth settings of your phone can help to clear the error.

It's been also observed that the low battery of the phone can cause issues with the BT connection.

I can not get the double tap to work. I have to use my phone to launch an app.

The best way to double tap is to pick a side of the cube and use two fingers to tap. You can also try tapping with your palm if the above did not work. Note that tapping the Cube when it stands on a table will probably not work well, because the Cube's accelerometer will not sense the movement in this case. Taps best detected when the Cube is in your hands.

My widget will not work. The phone says to update even after I did the update. Then when I launch the widget my Cube shows QR-code again

Widgets are only supported on the iOS platform for the moment (Android support is planned in the next coming releases). If you have an iPhone - you can add/remove/edit widgets from our WOWCube Connect iOS app, by tapping on the 'Customize' button on the app Home page

My Cube says 'Charger Error/Low Voltage'

Try re-inserting the Cube onto the charger (make sure it's properly placed to have a good contact). If above did not help - make sure you are using the original cable and adapter that came with the cube and it is plugged directly into an outlet with no extra adapters.

Does removing a game from the cube remove saved data and high scores?

No. the saved progress and scores are not removed unless you do a factory reset

How many games can it hold at once?

By default - maximum 19 games (per available screens in the menu). BUT each game varies on size so it all depends on which games you have installed. For instance 'Crazy Farm' and 'Larry From SF' are one of the "heaviest" games so to install it you most likely will have to uninstall a few games.

How do I adjust the tension of my Cube?

1. Using a cross-head screwdriver tighten all the six surface screws (pay attention to not overtighten the screws). NOTE: When inserting a screwdriver, do not use too much force to avoid scratching the glass on the module.
2. Loosen the six face screws for 1~2 turns
3. Check that the Cube rotates smoothly. If not - loosen the screws half-turn more

Our engineers are working hard in order to fix bugs and issues found, please be patient and we thank you for your understanding. If you have any questions, please feel free to reach us at [email protected], Discord #support-forum channel or any of our Social Media links.